ECS GF8100VM-M3 Specifications download pdf (Page 26)

Installing the Motherboard

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:

PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device.

PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.

VGA Port Connect your monitor to the VGA port.

USB Ports Use the USB ports to connect USB devices.

The above port definition can be changed to audio input or

audio output by changing the driver utility setting.

Audio Ports

(Optional)

Use the audio jacks to connect audio devices. The D port is

for stereo line-in signal, while the F port is for microphone

in signal. This motherboard supports 8-channel audio de-

vices that correspond to the A,B, C, and E port respec-

tively. In addition, all of the 3 ports, B, C, and E provide

users with both right & left channels individually. Users

please refer to the following note for specific port function

definition.

LAN Port Connect an RJ-45 jack to the LAN port to connect your

computer to the network.

DVI Port

(Optional)

Use the DVI port to connect the monitor.

A: Center & Woofer D: Line-in

B: Back Surround E: Front Out

C: Side Surround F: Mic_in Rear

Serial Port

(COM)

Use the COM port to connect serial devices such as mouse

or fax/modems.

This motherboard may adopt 6-channel audio ports.

Use the three audio ports to connect audio devices. The

first jack is for stereo line-in signal. The second jack is for

stereo line-out signal. The third jack is for microphone.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

No comments

ECS GF8100VM-M3 Specifications Page 26