ECS A55F2-M3 User Manual download pdf (Page 64)

A55F2-M3 USER MANUAL

Chapter 5

Figure 1.10 Windows Setup—Specify Devices

Installing the RAID Drivers

Your system may come with a Windows install CD that already includes AMD RAID

drivers. If so, then this section is not relevant.

If that is not the case (or you are trying to install a new version of Windows), then you

will need an AMD RAID driver F6 install floppy. Check to see if one came with your

system. If not, you can create one by downloading the appropriate driver package

and following the steps in this section.

Figure 1.9

Press F6 if you need to install a third party SCSI or RAID driver...

S=Specify Additional Devices ENTER=Continue F3=Exit

Windows Setup

Setup could not determine the type of one or more mass storage devices.

installed in your system, or you have chosen to manually specify an adapter.

Currently, Setup will load support for the following mass storage device(s).

<none>

* To specify additional SCSI adapters, CD-ROM drivers, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storag device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

Windows Setup

---------

1. Copy all files in "...\RAID\ATI\A55\Floppy\Win3264" to a floppy disk.

2. After you complete the RAID BIOS setup, boot from the Windows CD.

The Windows Setup program starts.

3. Press F6 and wait a few moments for the Windows Setup screen to

appear.

4. Specify the AMD drivers.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70

No comments

ECS A55F2-M3 User Manual Page 64