ECS Motherboard P33T-A V1.0 Specifications Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
33
Introducing the Motherboard
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Configure DRAM Timing by SPD (Enabled)
Press <Esc> to return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
IGD GTT Graphics smemory size No VT mode, 2MB
IGD Graphics Mode Select Enabled, 64MB
DVMT Memory 256MB
Memory Remap Feature Enabled
HPET Enabled
Help Item
Options
Auto
667 MHz
800 MHz
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
DVMT Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
IGD GTT Graphics memory size (No VT mode, 2MB)
This item is used to select the amount of Main Memory that is pre-allocated to
support the Internal Graphics Translation Table when IGD (Internal Graphics De-
vice) is enabled.
IGD Graphics Mode Select (Enabled, 64MB)
This item is used to select the amount of Main Memory that is pre-allocated to
support the Internal Graphics device in VGA (non-linear) and Native (linear) modes
when Internal graphics is enabled.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Comments to this Manuals

No comments