ECS P67H2-A3 (V1.0) Specifications download pdf (Page 47)

Using BIOS

Auto Detect DIMM/PCI Clk (Enabled)

When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.

Spread Spectrum (Enabled)

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic

Interference) generated by the system.

DIMM Voltage (Disabled)

This item allows users to adjust the DIMM voltage.

CPU Voltage (Disabled)

This item allows users to adjust the CPU voltage.

IMC Voltage (Disabled)

This item allows users to adjust the IMC voltage.

Genuine Intel(R) CPU 0 @ 3.10 GHz

This is display-only field and displays the information of the CPU installed in your

computer.

CAS#Latency(tcl) (9)

This item determines the operation of DDR SDRAM memory CAS(colulmn address

strobe). It is recommanded that you leave this item at the default value. The 2T

setting requires faster memory that specifically supports this mode.

RAS# to CAS# Delay(tRD) (9)

This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.

RAS# Active Time(tRAS) (24)

This item specifies the RAS# active time.

Intel Graphics Configuration

This item shows the information of Intel Graphics Configuration.

GT OverClocking [Disabled]

This item allows you to control the internal GFX Turbo mode.

Press <Esc> to return to the Performance Tunning page.

Press <Esc> to return to the M.I.B III menu page.

Row Precharge Time(tRP) (9)

This item specifies Row precharge to Active or Auto-Refresh of the same bank.

PLL Voltage (1.83V)

This item allows users to adjust the PLL voltage.

Command Rate (Auto)

This item allows users to adjust the command rate.

PCH Voltage (1.08V)

This item allows users to adjust the PCH voltage.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

No comments

ECS P67H2-A3 (V1.0) Specifications Page 47