ECS X58B-A3 SLI (V1.0) Bulk Specifications download pdf (Page 38)

Using BIOS

fHard Disk Drives (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

Hard Disk Drives

1st Drive Hard Drive

Help Item

Specifies the boot

sequence from the

available devices.

F10: Save ESC: Exit+/-/: Value

Enter : Select

F9: Load Default Settings

F1:General Help

: Move

mnlk

Hard Disk Drives

Press <Esc> to return to the Advanced Setup page.

APIC Mode (Enabled)

This item allows you to enable or disable the APIC (Advanced Programmable Inter-

rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-

tems, allowing support for up to 60 processors.

1st/2nd/3rd Boot Device (HDS728080PLA380/SONY DVD RW DRU-190/

Removable Dev.)

Use this item to determine the device order the computer used to look for an

operating system to load at start-up time. The devices showed here will be different

depending on the exact devices installed on your motherboard.

Intel VT-d (Disabled)

This item enables or disables Intel VT-d support.

CPU Revision (C0)

This item shows the CPU revision.

Current QPI Frequency (6.400GT)

This item shows the current QPI (Intel

QuickPath Interconnect) frequency.

QPI Freq. auto detect (Auto)

This item is used to detect the QPI frequency automatically. If you set this item to

Disabled, the item QPI Frequency will display.

Quick Power on Self Test (Enabled)

Enable this item to shorten the power on testing (POST) and have your system

start up faster. You might like to enable this item after you are confident that your

system hardware is operating smoothly.

Boot Up Numlock Status (On)

This item defines if the keyboard Num Lock key is active when your system is

started.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

Comments to this Manuals

No comments

ECS X58B-A3 SLI (V1.0) Bulk Specifications Page 38

Comments to this Manuals

Related products and manuals for Motherboards ECS X58B-A3 SLI (V1.0) Bulk